A source I have no prior contact with sent this image to me - the filename was HUMINT - IMG 6902.

A source I have no prior contact with sent this image to me - the filename was HUMINT - IMG 6902. I have no further information at this time, and am seeking help from the community in uncovering any details we can from this intel...
http://investigate.ingress.com/2017/03/28/humint-img-6902/

Comments

  1. That means there might be around 6901 other pictures? And I an See an Intel Map with 4 neutral portals.

    ReplyDelete
  2. I think they are researching the "Tecthulhu Module"...

    ReplyDelete
  3. The device on the left might be an Arduino.

    ReplyDelete
  4. I see an NFPA Safety diamond for "explosives 1.2 E" Which indicated an explosive material with a projection hazard (this is the second highest category of explosives), E indicates it may detonate in a fire. The masks they're wearing are dust masks, not organic vapor respirators.

    And that kind of looks like a log splitter turned up on end. Or possibly an old turbo encabulator.

    ReplyDelete
  5. They could be creating the interface pieces for the 13 pieces that the teams will bring to the Camp. They're supposed to enable the projects to interface with the portal network, so the ENL green may be just a testing phase.

    ReplyDelete
  6. HUMINT: en.wikipedia.org - Human intelligence (intelligence gathering) - Wikipedia
    "HUMINT is both a source of positive intelligence, but also of information of strong counterintelligence value"

    Major HUMINT organizations: https://en.wikipedia.org/wiki/Clandestine_human_intelligence

    NANTIC is a hidden HUMINT organization? or some HUMINT organization is partner of NIANTIC?

    ReplyDelete
  7. What if this is Intel from the Acolyte's team working on their Tecthulhu? And I think it is interesting to review investigate.ingress.com - The Acolyte’s Plans in light of #MagnusReawakens (last paragraph!)

    ReplyDelete
  8. shi zhao It does appear to be the glyph for XM.

    ReplyDelete
  9. I think it's a reflection off the lights. There's a sheet of something transparent leaned up against the motor mount or whatever that it.

    ReplyDelete
  10. I do wonder why they are wearing "contaminant/Hazard suits" what exactly is the hazard they are worried about. Could those suits have additional protective enhancements we do not know about? Or are they just clean suits such as are worn in some electronic facilities when working on (a version of a clean room suit - https://en.wikipedia.org/wiki/Cleanroom_suit)

    ReplyDelete
  11. Well the guy on the right has a flat butt. I believe they are working on the 2018 keurig coffee maker. This is all tied to the Niantic Blair Witch Project in the woods. If it awakens wear a magnum.

    ReplyDelete
  12. JoJo Stratton They look like they're just doing it to keep themselves or their goodies somewhat clean, because they have hair showing at the hoods, bare skin exposed at wrist and face, and they're only wearing dust masks, not respirators. They're working under a plastic tarp too, but it doesn't seem to be under positive/negative pressure. Their stuff is sitting on a draped surface, but none of this looks "sterile" to me.

    Maybe they're out in the woods... and trying to keep pollen or mildew off their stuff? The lighting is horrible, they could be in a tent or vehicle working off a generator.

    Also, I see a lot of screwdrivers and a couple wire strippers but no soldering guns (?), which suggests to me that these electronics were pre made elsewhere and they're just assembling the parts.

    ReplyDelete
  13. Martin Brenner​​ that definative is an Arduino the red LED and the lay out of the pins gives it away. I'm not sure what the red board is BUT I won't be surprised if it's from sparksfun.

    ReplyDelete
  14. No idea if that means something: 025 and 031 on the display of the meter? or G2.5 ?

    ReplyDelete
  15. Frank Furter It's a 3D torus model.

    The tools in the yellow box are very small screwdrivers, the one with blue handles is a Klein multipurpose wire stripper/electrician's tool, and I believe the short black handled ones are more wire strippers.

    ReplyDelete
  16. Isabel Kessler​, not a typical torus. If so, it has be transformed into something else (but topologically still a torus)?

    Could it be related to the NEPA safety diamond you talked about?
    A blast?

    A new weapon?

    ReplyDelete
  17. Anyhow, still can't see the torus...

    ReplyDelete
  18. regarding the torus - could that be linked to the microwormhole associated with the original peru and lima Niantic labs - plus.google.com - A loaded moment in time filled with surprise and panic...

    ReplyDelete
  19. Yeah, it looks like it was rendered with the same software that they used at this Berkeley site, but that could be significant, or it could be nothing, like it's common rendering software. Berkeley does some pretty wacked-out research, so who knows?

    Toruses are sometimes used to demonstrate how a 4D object would intersect with our 3D world, a simple 4D sphere goes through phases, one of which is a torus, but AFAIK it's not like the one on the screen. It could simply be a rendering of a more complex shape, though.

    math.berkeley.edu

    ReplyDelete
  20. Could also be a model of electron probability clouds. ...for like, carbon in an SP3 configuration? Maybe someone who's taken chemistry more recently can elucidate (or correct me)...

    Also, for a better explanation of 3D / 4D intersections, try this page:
    imgur.com - Exploring 4D Hyperdonuts

    ReplyDelete
  21. More like a double torus, with two wholes.
    And i like the theory of a 4D object intersecting a 3D world...

    ReplyDelete
  22. Gotta wonder if what they're doing is within the ToS?

    ReplyDelete

Post a Comment

Popular posts from this blog